Verified HPE7-A01 Exam Dumps PDF [2025] Access using PrepAwayTest
Try Best HPE7-A01 Exam Questions from Training Expert PrepAwayTest
HP HPE7-A01 exam is a comprehensive certification program that is recognized by many leading organizations in the IT industry. Aruba Certified Campus Access Professional Exam certification program is designed to help IT professionals enhance their skills and knowledge in network access solutions, and to validate their expertise in this area. By passing HPE7-A01 exam, IT professionals can demonstrate their ability to design, deploy, and manage effective network access solutions, and can enhance their career opportunities in the IT industry.
HP HPE7-A01 exam, also known as the Aruba Certified Campus Access Professional exam, is a certification test designed for IT professionals who specialize in wireless networking technologies. HPE7-A01 exam focuses on testing the candidates' knowledge and skills in various areas, including ArubaOS switches, WLAN design and implementation, authentication and security, and troubleshooting. Passing HPE7-A01 exam demonstrates that the candidate has a high level of proficiency in designing and deploying Aruba wireless networks, configuring network access controls, and troubleshooting complex network issues.
NEW QUESTION # 14
Your customer has asked you to assign a switch management role for a new user. The customer requires the user role to View switch configuration information and have access to the PUT and POST meth0ds for REST API.
Which default AOS-CX user role meets these requirements?
- A. helpdesk
- B. administrators
- C. sysops
- D. auditors
Answer: C
Explanation:
The sysops user role is a predefined role that allows users to view switch configuration information and have access to the PUT and POST methods for REST API. The sysops user role can also use the PATCH and DELETE methods for REST API, but not for all resources. The sysops user role is suitable for users who need to perform system operations on the switch, such as backup, restore, upgrade, or reboot.
NEW QUESTION # 15
Refer to the exhibit.
A company has deployed 200 AP-635 access points. To but is not working as expected.
What would be the correct action to fix the issue?
- A. Change the SSID to WPA3-Enterprise (CCM).
- B. Change the SSID to WPA3-Personal
- C. Change the SSID to WPA3-Enhanced Open
- D. Change the SSID to WPA3-Enterpnse (CNSA).
Answer: D
Explanation:
This is the correct action to fix the issue where the SSID is not working as expected. WPA3-Enhanced Open is a new security standard for public networks that uses Opportunistic Wireless Encryption (OWE) to provide encryption and privacy on open, non-password-protected networks. WPA3-Enhanced Open can be configured on an Aruba Access Point by changing the SSID security mode to WPA3-Enhanced Open in Aruba Central or Aruba Instant. The other options are incorrect because they either do not use WPA3-Enhanced Open or do not exist as valid security modes.
References:
https://www.arubanetworks.com/assets/wp/WP_WPA3-Enhanced-Open.pdf
https://www.arubanetworks.com/techdocs/Instant_86_WebHelp/Content/instant-ug/wpa3-enhanced- open.htm
NEW QUESTION # 16
Which statements are true about VSX LAG? (Select two.)
- A. The total number of configured links may not exceed 8 for the pair or 4 per switch
- B. LAG traffic is passed over VSX ISL links only while upgrading firmware on the switch pair
- C. Outgoing traffic is preferentially switched to local members of the LAG.
- D. Up to 255 VSX lags can be configured on all 83xx and 84xx model switches.
- E. Outgoing traffic is switched to a port based on a hashing algorithm which may be either switch in the pair
Answer: C,E
Explanation:
VSX LAG is a feature that allows a pair of Aruba CX switches to form a multichassis LAG with a downstream or upstream device. VSX LAG provides link redundancy and load balancing across the two switches. Outgoing traffic from the VSX pair to the peer device is switched to a port based on a hashing algorithm that considers various parameters such as source and destination MAC addresses, IP addresses, ports, etc. The hashing algorithm may select a port that belongs to either switch in the pair, depending on the traffic characteristics. However, outgoing traffic is preferentially switched to local members of the LAG, meaning that each switch tries to use its own ports first before using the ISL link to send traffic to the other switch's ports. This reduces the ISL utilization and improves performance.
NEW QUESTION # 17
You are building a configuration in Central that will be used for a standardized network design for small sites for your company, you want to use GUI configuration for gateways and Aps, while template configuration for switches. You need to align with Aruba best practices.
Which set of actions will satisfy these requirements?
- A. Create a single group in Central. Create a unique site for each type of device, and assign devices to the appropriate site.
- B. Create a single group in Central. Create a unique site for each location, and assign devices to the appropriate site.
- C. Create one group in Central for switches and a second group for APs and gateways. Create a unique site for each location, and assign devices to the appropriate site.
- D. Create one group in Central for switches a second group for APs. and a third group for gateways Create a unique site for each location, and assign devices to the appropriate site.
Answer: D
Explanation:
When configuring a standardized network design for small sites in Aruba Central, following Aruba's best practices typically involves grouping different types of devices and creating unique sites for each location. Since you want to use GUI configuration for gateways and APs while using template configuration for switches, it means you need to manage these device types separately.
This approach allows you to manage devices grouped by device type, while providing customized configurations for each site. Creating separate groups helps better manage device configurations and policies, especially when using different methods of configuration (GUI and template).
NEW QUESTION # 18
A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP-515s and AP-575S. Cables running to theAPs are not labeled. The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests). What is the correct configuration to ensure that APs will work properly?
- A.
- B.
- C.
Answer: B
Explanation:
Option C is the correct configuration to ensure that APs will work properly. It uses the ap command to configure a port profile for APs with VLAN 100 as the native VLAN and VLAN 200 and 300 as tagged VLANs. It also enables LLDP on the ports to discover the APs and assign them to the port profile automatically. The other options are incorrect because they either do not use the ap command, do not enable LLDP, or do not configure the VLANs correctly.
NEW QUESTION # 19
You need to have different routing-table requirements with Aruba CX 6300 VSF configuration Assuming the correct layer-2 VLAN already exists how would you create a new OSPF configuration for a separate routing table?
- A. Attach a new OSFP process ID with a custom routing table
- B. Attach OSPF process ID in the VRF configuration.
- C. Create a new OSPF area, and attach VRF name.
- D. Create a new OSPF process ID with vrf name.
Answer: D
Explanation:
Explanation
To create a new OSPF configuration for a separate routing table, you need to create a new OSPF process ID with vrf name. This will create a new OSPF instance that is associated with the specified VRF and its routing table. The other options are incorrect because they either do not create a new OSPF instance or do not associate it with a VRF. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.html
NEW QUESTION # 20
With Aruba CX 6300. how do you configure ip address 10 10 10 1 for the interface in default state for interface 1/1/1?
- A. int 1/1/1. routing, ip address 10.10.10 1/24
- B. int 1/1/1. switching, ip address 10 10 10 1/24
- C. int 1/1/1. no switching, ip address 10 10 10.1/24
- D. int 1/1/1. ip address 10.10.10.1/24
Answer: C
Explanation:
To configure an IP address for an interface in default state for interface 1/1/1 on Aruba CX 6300 switch, you need to disable switching on the interface first with the command no switching. Then you can assign an IP address with the command ip address. The other options are incorrect because they either do not disable switching or use invalid keywords such as switching or routing.
References:
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch01.html
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch02.html
NEW QUESTION # 21
What is one advantage of using OCSP vs CRLs for certificate validation?
- A. reduces latency between the time a certificate is revoked and validation reflects this status
- B. supports longer certificate validity periods
- C. higher availability for certificate validation
- D. less complex to implement
Answer: A
Explanation:
OCSP is a protocol that allows clients to query the CA or a trusted responder for the status of a specific certificate. OCSP requests and responses are smaller and faster than CRLs, and they can provide real-time information about the revocation status of a certificate. CRLs are lists of all revoked certificates that are downloaded from the CA. CRLs can present issues, as they can become outdated and have to be downloaded frequently. Therefore, OCSP reduces latency between the time a certificate is revoked and validation reflects this status.
NEW QUESTION # 22
A company deployed Dynamic Segmentation with their CX switches and Gateways After performing a security audit on their network, they discovered that the tunnels built between the CX switch and the Aruba Gateway are not encrypted. The company is concerned that bad actors could try to insert spoofed messages on the Gateway to disrupt communications or obtain information about the network.
Which action must the administrator perform to address this situation?
- A. Enable Enhanced security
- B. Enable GRE security
- C. Enable Enhanced PAPI security
- D. Enable Secure Mode Enhanced
Answer: A
Explanation:
Explanation
To address the situation of unencrypted tunnels between the CX switch and the Aruba Gateway, the administrator must enable Enhanced security on both devices. Enhanced security is a feature that provides encryption and authentication for GRE tunnels between CX switches and Aruba Gateways using IPSec.
Enhanced security can be enabled globally or per tunnel on both devices using CLI commands or Web UI options. The other options are incorrect because they either do not provide encryption or authentication for GRE tunnels or do not exist as features. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch05.html
https://www.arubanetworks.com/assets/ds/DS_AOS-CX.pdf
NEW QUESTION # 23
Match each PoE power class to Its corresponding 802.3 standard. (Options may he used more than once or not at all)
Answer:
Explanation:
Explanation:
* Class 3 (15.4W): 802.3af
* Class 4 (30W): 802.3at
* Class 6 (60W): 802.3bt
* Class 8 (90W): 802.3bt
NEW QUESTION # 24
A customer is using a legacy application that communicates at layer-2. The customer would like to keep this application working to a remote site connected via layer-3 All legacy devices are connected to a dedicated Aruba CX 6200 switch at each site.
What technology on the Aruba CX 6200 could be used to meet this requirement?
- A. Inclusive Multicast Ethernet Tag (IMET)
- B. Ethernet over IP (EolP)
- C. Static VXLAN
- D. Generic Routing Encapsulation (GRE)
Answer: A
Explanation:
VXLAN is a technology that can be used to meet the requirement of using a legacy application that communicates at layer-2 across a layer-3 network. Static VXLAN is a feature that allows the creation of layer-2 overlay networks over a layer-3 underlay network using VXLAN tunnels. Static VXLAN does not require any control plane protocol or VTEP discovery mechanism, and can be configured manually on the Aruba CX 6200 switches. The other options are incorrect because they either do not support layer-2 communication over layer-3 network or are not supported by Aruba CX 6200 switches. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.htmlhttps://www.aruba
NEW QUESTION # 25
Match the appropriate QoS concept with its definition. (Options may be used more than once or not at all.)
Answer:
Explanation:
Explanation:
QoS concept: Class of Service Definition: 3) A method for classifying network traffic using access categories based on the IEEE 802.11e QoS standards QoS concept: Differentiated services Definition: 2) A method for classifying network traffic at layer-3 or marking packets with one of 64 different service classes QoS concept: WMM Definition: 4) A method for classifying network traffic using access categories based on the IEEE 802.11e QoS standards
NEW QUESTION # 26
Your customer is having connectivity issues with a newly-deployed Microbranch group The access points in this group are online in Aruba Central, but no VPN tunnels are forming..
What is the most likely cause of this issue?
- A. There may be a firewall blocking GRE tunneling between the AP and the gateway
- B. The SSL certificate on the gateway used to encrypt the connection has not been added to the APs trust list
- C. The gateway group is running in automatic cluster mode and should be in manual cluster mode
- D. There is a time difference between the AP and the gateways The gateways should have NTP added
Answer: A
Explanation:
This is the most likely cause of the issue where the access points in a Microbranch group are online in Aruba Central, but no VPN tunnels are forming. A Microbranch group is a group that contains both APs and Gateways and allows them to form VPN tunnels for secure communication. The VPN tunnels use GRE (Generic Routing Encapsulation) as the encapsulation protocol and IPSec as the encryption protocol. If there is a firewall blocking GRE traffic between the AP and the gateway, the VPN tunnels cannot be established. The other options are incorrect because they either do not affect the VPN tunnel formation or do not apply to a Microbranch group.
References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos- solutions/gateways/microb
https://www.arubanetworks.com/assets/tg/TB_ArubaGateway.pdf
NEW QUESTION # 27
What is a primary benefit of BSS coloring?
- A. BSS color tags improve performance by allowing APS on the same channel to be farther apart
- B. BSS color tags are applied on the wireless controllers and can reduce the threshold for interference_
- C. BSS color tags are applied to WI-Fi channels and can reduce the threshold tor interference
- D. BSS color tags improve security by identifying rogue APS and tagging them as threats.
Answer: C
Explanation:
The primary benefit of BSS coloring is D. BSS color tags are applied to Wi-Fi channels and can reduce the threshold for interference.
BSS coloring is a mechanism that allows Wi-Fi 6 devices to mark each frame with a color code that identifies the BSS (Basic Service Set) it belongs to. This helps differentiate between frames from different BSSs that share the same channel and avoid unnecessary collisions and backoffs. BSS coloring also introduces an adaptive threshold for interference, which means that Wi-Fi 6 devices can adjust the signal strength value that determines whether a channel is busy or not based on the current network environment. This allows for more efficient use of spectrum and higher throughput in dense scenarios12.
NEW QUESTION # 28
Due to a shipping error, five (5) Aruba AP-515S and one (1) Aruba CX 6300 were sent directly to your new branch office You have configured a new group persona for the new branch office devices in Central, but you do not know their MAC addresses or serial numbers The office manager is instructed via text message on their smartphone to onboard all the new hardware into Aruba Central.
What application must the office manager use on their phone to complete this task?
- A. Aruba Central App
- B. Aruba installer App
- C. Aruba Onboard App
- D. Aruba CX Mobile App
Answer: A
NEW QUESTION # 29
Your customer is having issues with Wi-Fi 6 clients staying connected to poor-performing APs when a higher throughput APs are closer.
Which technology should you implement?
- A. Airmatch
- B. ARM
- C. ClientMatch
- D. Clearpass
Answer: C
Explanation:
Wi-Fi 6 is an industry certification for products that support the new wireless standard 802.11ax, also known as "high-efficiency wireless". Wi-Fi 6 offers increased capacities, improved resource utilization and higher throughput speeds than previous standards.
Option B: ClientMatch
This is because option B shows how to use ClientMatch to optimize the wireless performance of Wi-Fi 6 clients on a UniFi network. ClientMatch is a feature that uses machine learning to analyze the traffic patterns of each client and assign them to the best available AP based on their location, device type, and network conditions2.
Therefore, option B is the best technology to implement for your customer's issue.
1: https://help.ui.com/hc/en-us/articles/221029967-UniFi-Network-Optimizing-Wireless-Connectivity
2: https://help.ui.com/hc/en-us/articles/360012947634-UniFi-Network-Optimizing-Wireless-Speeds
NEW QUESTION # 30
You are configuring an SVI on an Aruba CX switch that needs to have the following characteristics:
* VLANID = 25
. IPv4 address 10 105 43 1 with mask 255 255 255.0
* IPv6 address fd00:5708::f02d:4df6 with a 64 bit prefix length
* member of VRF eng
* VRF eng and VLAN 25 have not yet been created
Which command lists will satisfy the requirements with the least number of commands?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Explanation
The other options either use more commands or do not create the VRF or the VLAN.
Option C uses the following commands:
vrf eng: This command creates a VRF named eng and enters the VRF configuration mode1.
vlan 25: This command creates a VLAN with ID 25 and enters the VLAN configuration mode2.
interface vlan 25: This command creates an SVI on VLAN 25 and enters the interface configuration mode3.
ip address 10.105.43.1/24 ipv6 address fd00:5780::102d:4df6/64 vrf attach eng: This command assigns an IPv4 address of 10.105.43.1 with a subnet mask of 255.255.255.0 and an IPv6 address of fd00:5780::102d:4df6 with a prefix length of 64 to the SVI, and attaches it to the VRF eng.
NEW QUESTION # 31
Refer to the exhibit.
With Core-1. what is the default value for config-revision?
- A. 0
- B. 1
- C. 0. 0
- D. 1-0
Answer: B
Explanation:
Explanation
The default value for config-revision on Core-1 is 0. Config-revision is a parameter that indicates the configuration version of a VSX pair. It is used to synchronize the configuration between the VSX peers and to detect any configuration mismatch. The config-revision value is set to 0 by default on both VSX peers and is incremented by 1 every time a configuration change is made on either peer. The other options are incorrect because they do not reflect the default value of config-revision. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch07.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
NEW QUESTION # 32
Select the Aruba stacking technology matching each option (Options may be used more than once or not at all.)
Answer:
Explanation:
Explanation
a) Support up to 10 devices per stack ->
b) Support two devices per stack ->
c) Individual ISL links up to 400G are supported ->
d) individual ISL links up to 50G are supported ->
e) A maximum aggregate ISL bandwidth of 200G is supported ->
References: 1
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/GUID-2E425DAE-EC54-4313-9D
NEW QUESTION # 33
When configuring UBT on a switch what will happen when a gateway role is not specified?
- A. The switch will assign the default deny role to the client.
- B. The gateway will send back the deny role to the client.
- C. The switch will put the client on the access VLAN
- D. The gateway will assign a default role to the client
Answer: C
Explanation:
According to the Aruba Documentation Portal1, user-based tunneling (UBT) is a feature that uses GRE to tunnel ingress traffic on a switch interface to a gateway for further processing. UBT enables a switch to provide a centralized security policy, using per-user authentication and access control to ensure consistent access and permissions.
Option A: The switch will put the client on the access VLAN This is because option A shows how UBT works on an Aruba switch. When a device connects to the network, it is authenticated using either MAC Authentication or 802.1X and triggers an enforcement policy from ClearPass, which contains an enforcement profile with a user role configuration. The user role can be assigned locally on the switch or on ClearPass as part of an enforcement profile. The user role determines the VLAN that the device belongs to and the access policies that apply to it.
NEW QUESTION # 34
For the Aruba CX 6400 switch, what does virtual output queueing (VOQ) implement that is different from most typical campus switches?
- A. per port ASICs
- B. VSX
- C. large egress packet buffers
- D. large ingress packet buffers
Answer: D
Explanation:
The Aruba CX 6400 switch is a modular switch that supports high-performance and high-density Ethernet switching for campus and data center networks. One of the features that distinguishes the Aruba CX 6400 switch from most typical campus switches is virtual output queueing (VOQ).
VOQ is a technique that implements large ingress packet buffers on each port to prevent head-of- line blocking and packet loss due to congestion. VOQ allows each port to have multiple queues for different output ports and prioritize packets based on their destination and QoS class. VOQ enables the Aruba CX 6400 switch to achieve high throughput and low latency for various traffic types and scenarios.
NEW QUESTION # 35
You need to configure an ACL on an Aruba switch to block HTTP traffic but allow HTTPS. Which of the following ACL rules accomplishes this?
- A. permit tcp any any eq 443; deny tcp any any eq 80
- B. deny tcp any any eq 80; permit tcp any any eq 443
- C. permit tcp any any neq 80
- D. deny tcp any any eq 443; permit tcp any any eq 80
Answer: B
NEW QUESTION # 36
Due to a shipping error, five (5) Aruba AP-515S and one (1) Aruba CX 6300 were sent directly to your new branch office. You have configured a new group persona for the new branch office devices in Central, but you do not know their MAC addresses or serial numbers. The office manager is instructed via text message on their smartphone to onboard all the new hardware into Aruba Central.
What application must the office manager use on their phone to complete this task?
- A. Aruba Central App
- B. Aruba installer App
- C. Aruba Onboard App
- D. Aruba CX Mobile App
Answer: A
Explanation:
Aruba Central is a cloud-based networking solution that empowers IT with AI-powered insights, intuitive visualizations, workflow automation, and edge-to-cloud security to manage campus, branch, remote, data center, and IoT networks from one dashboard. Aruba Central also provides a mobile app that allows users to easily onboard and monitor devices. The app enables users to scan the barcode of a device (such as an AP or a switch) and add it to their network in Aruba Central. The app also lets users monitor the details of Aruba wireless access points and switches and their clients on their network. Therefore, the application that the office manager must use on their phone to complete the task of onboarding all the new hardware into Aruba Central is the Aruba Central App.
NEW QUESTION # 37
You are helping an onsite network technician bring up an Aruba 9004 gateway with ZTP for a branch office The technician was to plug in any port for the ZTP process to start Thirty minutes after the gateway was plugged in new users started to complain they were no longer able to get to the internet. One user who reported the issue stated their IP address is 172.16 0.81 However, the branch office network is supposed to be on 10.231 81.0/24.
What should the technician do to alleviate the issue and get the ZTP process started correctly?
- A. Factory default and reboot the gateway to restart the process.
- B. Move the cable on the gateway to G0/0/1. and add the device's MAC and Serial number in Central
- C. Move the cable on the gateway from port G0/0V1 tc port GO 0.0
- D. Turn off the DHCP scope on the gateway, and set DNS correctly on the gateway to reach Aruba Activate
Answer: C
Explanation:
Explanation
Aruba 9004 gateway supports ZTP on port G0/0/0 by default1. If the gateway is connected to a different port, such as G0/0/V1, it will not be able to communicate with Aruba Activate and Aruba Central, which are required for ZTP2. Moreover, port G0/0/V1 is configured as a DHCP server by default, which can cause IP address conflicts with the existing network3. Therefore, the technician should move the cable on the gateway to port G0/0/0, which will allow the gateway to obtain an IP address from the network DHCP server and start the ZTP process. The other options are not correct because they will not solve the issue or enable ZTP. For example, option D will not work because factory defaulting and rebooting the gateway will not change the port configuration or behavior3.
NEW QUESTION # 38
......
Latest 100% Passing Guarantee - Brilliant HPE7-A01 Exam Questions PDF: https://www.prepawaytest.com/HP/HPE7-A01-practice-exam-dumps.html
Practice Examples and Dumps & Tips for 2025 Latest HPE7-A01 Valid Tests Dumps: https://drive.google.com/open?id=16lXsvOzAVb6GrP3CHksm29k01F8mcygt