[Jan 29, 2022] Latest 300-730 Exam with Accurate Implementing Secure Solutions with Virtual Private Networks PDF Questions
Practice To 300-730 - PrepAwayTest Remarkable Practice On your Implementing Secure Solutions with Virtual Private Networks Exam
Cisco 300-730 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
NEW QUESTION 40
Which VPN solution uses TBAR?
- A. VTI
- B. Cisco AnyConnect
- C. GETVPN
- D. DMVPN
Answer: C
NEW QUESTION 41
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?
- A. *$DfltlkeldentityS*
- B. *$AnyConnectClient$*
- C. *$SecureMobilityClient$*
- D. *$RemoteAccessVpnClient$*
Answer: B
NEW QUESTION 42
An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of "MM_NO_STATE." Why does this failure occur?
- A. ESP traffic is being dropped.
- B. Tunnel protection is not applied to the DMVPN tunnel.
- C. The Phase 1 policy does not match on both devices.
- D. The ISAKMP policy priority values are invalid.
Answer: A
NEW QUESTION 43
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?
- A. *$DfltlkeldentityS*
- B. *$AnyConnectClient$*
- C. *$SecureMobilityClient$*
- D. *$RemoteAccessVpnClient$*
Answer: B
Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect- IKEv2-Remote-Access.html
NEW QUESTION 44
In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do not form. Which troubleshooting step solves the issue?
- A. Verify that the tunnel interface is contained within a VRF.
- B. Verify the spoke configuration to check if the NHRP redirect is enabled.
- C. Verify the hub configuration to check if the NHRP shortcut is enabled.
- D. Verify that the spoke receives redirect messages and sends resolution requests.
Answer: D
NEW QUESTION 45
DRAG DROP
Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.
Select and Place:
Answer:
Explanation:
Section: Site-to-site Virtual Private Networks on Routers and Firewalls Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-16/sec- conn-dmvpn-xe-16-book/sec-conn-dmvpn-summ-maps.html
NEW QUESTION 46
Refer to the exhibit.
Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)
- A. group-url https://172.16.31.10/General enable
- B. authentication certificate
- C. authentication aaa
- D. group-policy General internal
- E. group-alias General enable
Answer: D,E
NEW QUESTION 47
Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?
- A. plug-ins
- B. Smart Tunnel
- C. WebType ACL
- D. single sign-on
Answer: B
NEW QUESTION 48
Which VPN does VPN load balancing on the ASA support?
- A. Cisco AnyConnect
- B. VTI
- C. IPsec site-to-site tunnels
- D. L2TP over IPsec
Answer: A
NEW QUESTION 49
What are two functions of ECDH and ECDSA? (Choose two.)
- A. revocation
- B. encryption
- C. nonrepudiation
- D. key exchange
- E. digital signature
Answer: D,E
NEW QUESTION 50
Which two remote access VPN solutions support SSL? (Choose two.)
- A. L2TP
- B. Cisco AnyConnect
- C. clientless
- D. FlexVPN
- E. EZVPN
Answer: B,C
NEW QUESTION 51
Refer to the exhibit.
Based on the exhibit, why are users unable to access CCNP Webserver bookmark?
- A. The URL is being blocked by a WebACL.
- B. The ASA cannot resolve the URL.
- C. The user cannot access the URL.
- D. The bookmark has been disabled.
Answer: D
NEW QUESTION 52
An engineer must configure remote desktop connectivity for offsite admins via clientless SSL VPN, configured on a Cisco ASA to Windows Vista workstations. Which two configurations provide the requested access? (Choose two.)
- A. SSH bookmark via the SSH plugin
- B. RDP2 bookmark via the RDP2 plugin
- C. Citrix bookmark via the ICA plugin
- D. Telnet bookmark via the Telnet plugin
- E. VNC bookmark via the VNC plugin
Answer: A,B
NEW QUESTION 53
Cisco AnyConnect Secure Mobility Client has been configured to use IKEv2 for one group of users and SSL for another group. When the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect. What might be the problem?
- A. The new client image does not use the same major release as the current one.
- B. Client software updates are not supported with IKEv2.
- C. Client services are not enabled.
- D. The XML profile is not configured correctly for the affected users.
Answer: C
Explanation:
Section: Remote access VPNs
NEW QUESTION 54 
Refer to the exhibit. The customer can establish a Cisco AnyConnect connection without using an XML profile. When the host "ikev2" is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue?
- A. UserGroup must match connection profile.
- B. The IP address is incorrect.
- C. Primary protocol should be SSL.
- D. The HostName is incorrect.
Answer: A
Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://community.cisco.com/t5/security-documents/anyconnect-xml-settings/ta-p/3157891
NEW QUESTION 55
Refer to the exhibit.
All internal clients behind the ASA are port address translated to the public outside interface that has an IP address of 3.3.3.3. Client 1 and client 2 have established successful SSL VPN connections to the ASA. What must be implemented so that "3.3.3.3" is returned from a browser search on the IP address?
- A. Tunnel Network List Below under Group Policy
- B. Tunnel All Networks under Group Policy
- C. Exclude Network List Below under Group Policy
- D. Same-security-traffic permit inter-interface under Group Policy
Answer: A
NEW QUESTION 56
Refer to the exhibit.
Cisco AnyConnect must be set up on a router to allow users to access internal servers 192.168.0.10 and 192.168.0.11. All other traffic should go out of the client's local NIC. Which command accomplishes this configuration?
- A. svc split include acl CCNP
- B. svc split exclude 192.168.0.0 255.255.255.0
- C. svc split exclude acl CCNP
- D. svc split include 192.168.0.0 255.255.255.0
Answer: A
NEW QUESTION 57
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?
- A. EAP query-identity
- B. AnyConnect profile
- C. EAP-AnyConnect
- D. use of certificates instead of username and password
Answer: B
Explanation:
Section: Remote access VPNs
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html
NEW QUESTION 58
Cisco AnyConnect clients need to transfer large files over the VPN sessions. Which protocol provides the best throughput?
- A. L2TP
- B. DTLS
- C. IPsec IKEv1
- D. SSL/TLS
Answer: B
NEW QUESTION 59
What uses an Elliptic Curve key exchange algorithm?
- A. ECDSA
- B. SHA
- C. AES-GCM
- D. ECDHE
Answer: D
Explanation:
Reference:
https://blog.cloudflare.com/a-relatively-easy-to-understand-primer-on-elliptic-curve-cryptography/
NEW QUESTION 60
......
Exam Questions and Answers for 300-730 Study Guide Questions and Answers!: https://www.prepawaytest.com/Cisco/300-730-practice-exam-dumps.html
Practice To 300-730 - PrepAwayTest Remarkable Practice On your Implementing Secure Solutions with Virtual Private Networks Exam: https://drive.google.com/open?id=1SJa2d4Lf2F_H0mfs9Bcj728BRAdMGqkV