HPE0-V14 Free Update With 100% Exam Passing Guarantee [2021]
[Sep-2021] Verified HP Exam Dumps with HPE0-V14 Exam Study Guide
NEW QUESTION 154
You need to review a warning on a Nimble storage array.
Click on the menu option that displays this information.
Answer:
Explanation:
Explanation
Reference: https://infosight.hpe.com/InfoSight/media/cms/active/public/ pubs_GUI_Administration_Guide_NOS_50x.whz/axc1501525262696.html
NEW QUESTION 155
You have configured a port on an HPE FlexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs.
Given the configuration above, what should happen to any of the untagged traffic coming from the VMware ESXi host?
- A. The untagged traffic will be transmitted in vlan 1.
- B. The untagged traffic will be transmitted in vlan 2.
- C. The untagged traffic will be transmitted in vlan 50.
- D. The untagged traffic with be dropped.
Answer: C
NEW QUESTION 156
Match the Networking Product Family to the appropriate use case:
Answer:
Explanation:
NEW QUESTION 157
A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?
- A. One VSX stack of four Aruba 8320 48-port 1/10GBASE-T switches
- B. One IRF stack of four HPE 5710 48-port 1/10GBASE-T switches
- C. Two VSX stacks of two Aruba 8320 48-port 1/10GBASE-T switches
- D. Two IRF stacks of two HPE 5710 48-port 1/10GBASE-T switches
Answer: B
Explanation:
Explanation
Needs 4 switches for port count, customer wants minimum of managed devices so one stack, VSX only supports two switches so must be an IRF based stack. As to ShaunSong's comment, 10GBaseT ports also negotiate 1000BaseT so are inherently 1/10Gb capable.
NEW QUESTION 158
You are installing a data center switch.
Which methods are recommended to configure the switch? (Choose two.)
- A. Use out-of-band management with a dedicated management connection
- B. Use out-of-band management and keep the default settings
- C. Use in-band management and configure the AUX0 interface for scheme authentication
- D. Use in-band management with an IP address and subnet mask that is reachable on the management network
Answer: A,D
NEW QUESTION 159
What is the correct cable type to use when connecting a pair of switches using Long Range (LR) Transceivers?
- A. Twin-Ax
- B. Direct Attach Cable (DAC)
- C. Single Mode Fiber
- D. Multi-mode Fiber
Answer: C
Explanation:
Explanation
Single-mode uses a single relatively straight beam of light, transmitted directly through a core of glass (or occasionally plastic) that's usually 50 microns across. Single-mode accommodates large power levels, and is almost exclusively used for Long Range (LR) applications.
Reference: https://info.hummingbirdnetworks.com/blog/answering-your-frequently-asked-QUESTION NO:s-about- different-types-of-10-gigabit-cisco-sfp-units
NEW QUESTION 160
You are troubleshooting an HPE ProLiant rack-mount server. You need to collect event data from the server, even when it is not operational.
Which tool should you use?
- A. Insight Online
- B. Integrated Management Log
- C. InfoSight
- D. OS Event Viewer
Answer: A
NEW QUESTION 161
Refer to the exhibit.
A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible network throughput.
Given the BOM in the exhibit, what do you need to add to this server to meet the customer requirement?
- A. Secondary Riser Kit
- B. SSD Drives
- C. Workload Accelerator
- D. Smart Storage Hybrid Capacitor
Answer: D
NEW QUESTION 162
A system administrator's performing the BIOS/Platform configuration of a DL380 Gen10 server. You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? (Choose two.)
- A. UEFI shell
- B. Nimble controller
- C. Memory
- D. iSCSI HBA
- E. Fans
Answer: A,B
NEW QUESTION 163
Which web service uses baste CRUD operations performed on resources using HTTP Post, Get. Put. Delete, and Patch?
- A. cURL
- B. SOAP
- C. REST
- D. CORBA
Answer: B
NEW QUESTION 164
Which HPE solution brings together CPU, Memory, and Disk with an unpredictable workload into a single management infrastructure?
- A. Primera
- B. dHCI
- C. Nimble
- D. SimpliVity
Answer: D
Explanation:
Explanation/Reference: https://community.hpe.com/t5/Around-the-Storage-Block/Accelerating-hyperconvergence-with-end- to-end-25GbE-storage/ba-p/7001560
NEW QUESTION 165
A customer needs a shared storage solution for a virtualization platform that will host a database application.
The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?
- A. Supported by Infosight for predictive analytics
- B. Fibre Channel Connectivity
- C. Predictable performance event with one failed controller
- D. 10Gb iSCSI support
Answer: C
Explanation:
Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/a00008273enw.pdf
NEW QUESTION 166
Which protocol can be used to access a shared directory on a network-attached storage device?
- A. SMB
- B. SNMP
- C. BGP
- D. FCP
Answer: A
NEW QUESTION 167
Match the HPE Tool with its use case. Select all that apply.
Answer:
Explanation:
NEW QUESTION 168
A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.
Answer:
Explanation:
Explanation
Server model - HPE Proliant DL380 Gen10
Storage model - HPE MSA 2040
NEW QUESTION 169
A customer needs a shared storage solution for a virtualization platform that will host a database application.
The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?
- A. Predictable performance event with one failed controller
- B. Fibre Channel Connectivity
- C. Supported by Infosight for predictive analytics
- D. 10Gb iSCSI support
Answer: C
Explanation:
Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/a00008273enw.pdf
NEW QUESTION 170
You need to update the firmware on an MSL2024.
Which HPE utility do you need to use?
- A. Smart Storage Administrator
- B. Library & Tape Tools
- C. OneView Standard
- D. Central Management Console
Answer: B
NEW QUESTION 171
Which backup targets are available from an HPE StoreOnce backup system? (Choose two.)
- A. iSCSI
- B. Catalyst
- C. NVMe
- D. VTL
- E. S3
Answer: B,D
Explanation:
Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03824941
NEW QUESTION 172
Refer to the exhibit.
A customer is planning to deploy a branch office server rack
What should you change in your configuration to ensure it meets the customer requirements?
- A. Change the controller to an HF20H.
- B. Change the 10GbE Optical ports to 10BaseT.
- C. Change the controller to an AF20.
- D. Change the 10GbE Optical ports to Fibre Channel.
Answer: D
NEW QUESTION 173
......
Authentic Best resources for HPE0-V14 Online Practice Exam: https://www.prepawaytest.com/HP/HPE0-V14-practice-exam-dumps.html
HPE0-V14 Test Engine Practice Exam: https://drive.google.com/open?id=1ppvFj2IDm0QwVNtbKYmFMVT3YtxUL7uC