New 2021 NSE4_FGT-6.4 Dumps for Fortinet NSE 4 Certified Exam Questions & Answer
Realistic Verified NSE4_FGT-6.4 exam dumps Q&As - NSE4_FGT-6.4 Free Update
How to book the Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
To apply for the Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam, You have to follow these steps:
- Step 1: Go to the Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam Official Site
- Step 2: Read the instruction Carefully
- Step 3: Follow the given steps
- Step 4: Apply for the Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
NEW QUESTION 27
Refer to the exhibit.
In the network shown in the exhibit, the web client cannot connect to the HTTP web server. The administrator runs the FortiGate built-in sniffer and gets the output as shown in the exhibit.
What should the administrator do next to troubleshoot the problem?
- A. Run a sniffer on the web server.
- B. Execute another sniffer in the FortiGate, this time with the filter "host 10.0.1.10"
- C. Capture the traffic using an external sniffer connected to port1.
- D. Execute a debug flow.
Answer: D
NEW QUESTION 28
Refer to the exhibit.
The global settings on a FortiGate device must be changed to align with company security policies. What does the Administrator account need to access the FortiGate global settings?
- A. Change password
- B. Change Administrator profile
- C. Enable restrict access to trusted hosts
- D. Enable two-factor authentication
Answer: D
NEW QUESTION 29
Examine the IPS sensor configuration shown in the exhibit, and then answer the question below.
An administrator has configured the WINDOWS_SERVERS IPS sensor in an attempt to determine whether the influx of HTTPS traffic is an attack attempt or not. After applying the IPS sensor, FortiGate is still not generating any IPS logs for the HTTPS traffic.
What is a possible reason for this?
- A. A DoS policy should be used, instead of an IPS sensor.
- B. The firewall policy is not using a full SSL inspection profile.
- C. The HTTPS signatures have not been added to the sensor.
- D. A DoS policy should be used, instead of an IPS sensor.
- E. The IPS filter is missing the Protocol: HTTPS option.
Answer: B
NEW QUESTION 30
In consolidated firewall policies, IPv4 and IPv6 policies are combined in a single consolidated policy. Instead of separate policies. Which three statements are true about consolidated IPv4 and IPv6 policy configuration?
(Choose three.)
- A. The IP version of the sources and destinations in a policy must match.
- B. The Incoming Interface. Outgoing Interface. Schedule, and Service fields can be shared with both IPv4 and IPv6.
- C. The policy table in the GUI can be filtered to display policies with IPv4, IPv6 or IPv4 and IPv6 sources and destinations.
- D. The policy table in the GUI will be consolidated to display policies with IPv4 and IPv6 sources and destinations.
- E. The IP version of the sources and destinations in a firewall policy must be different.
Answer: C,D,E
NEW QUESTION 31
Which two statements about IPsec authentication on FortiGate are correct? (Choose two.)
- A. FortiGate supports pre-shared key and signature as authentication methods.
- B. A certificate is not required on the remote peer when you set the signature as the authentication method.
- C. For a stronger authentication, you can also enable extended authentication (XAuth) to request the remote peer to provide a username and password
- D. Enabling XAuth results in a faster authentication because fewer packets are exchanged.
Answer: A,B
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/913287/ipsec-vpn-authenticating-a- remote-fortigate-peer-with-a-pre-shared-key
NEW QUESTION 32
Examine the IPS sensor configuration shown in the exhibit, and then answer the question below.
An administrator has configured the WINDOWS_SERVERS IPS sensor in an attempt to determine whether the influx of HTTPS traffic is an attack attempt or not. After applying the IPS sensor, FortiGate is still not generating any IPS logs for the HTTPS traffic.
What is a possible reason for this?
- A. A DoS policy should be used, instead of an IPS sensor.
- B. The firewall policy is not using a full SSL inspection profile.
- C. The HTTPS signatures have not been added to the sensor.
- D. A DoS policy should be used, instead of an IPS sensor.
- E. The IPS filter is missing the Protocol: HTTPS option.
Answer: B
NEW QUESTION 33
Refer to the exhibit.
Which contains a network diagram and routing table output.
The Student is unable to access Webserver.
What is the cause of the problem and what is the solution for the problem?
- A. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. - B. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. - C. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. - D. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1.
Answer: A
NEW QUESTION 34
Examine this FortiGate configuration:
Examine the output of the following debug command:
Based on the diagnostic outputs above, how is the FortiGate handling the traffic for new sessions that require inspection?
- A. It is dropped.
- B. It is allowed, but with no inspection
- C. It is allowed and inspected, as long as the only inspection required is antivirus.
- D. It is allowed and inspected as long as the inspection is flow based
Answer: A
NEW QUESTION 35
Which statement about the policy ID number of a firewall policy is true?
- A. It represents the number of objects used in the firewall policy.
- B. It is required to modify a firewall policy using the CLI.
- C. It defines the order in which rules are processed.
- D. It changes when firewall policies are reordered.
Answer: B
NEW QUESTION 36
How does FortiGate act when using SSL VPN in web mode?
- A. FortiGate acts as DNS server.
- B. FortiGate acts as an FDS server.
- C. FortiGate acts as router.
- D. FortiGate acts as an HTTP reverse proxy.
Answer: D
NEW QUESTION 37
What types of traffic and attacks can be blocked by a web application firewall (WAF) profile? (Choose three.)
- A. Server information disclosure attacks
- B. Credit card data leaks
- C. Traffic to inappropriate web sites
- D. SQL injection attacks
- E. Traffic to botnetservers
Answer: A,B,D
NEW QUESTION 38
A FortiGate is operating in NAT mode and configured with two virtual LAN (VLAN) sub interfaces added to the physical interface.
Which statements about the VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in different subnets.
- A. The two VLAN sub interfaces must have different VLAN IDs.
- B. The two VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in the same subnet.
- C. The two VLAN sub interfaces can have the same VLAN ID, only if they belong to different VDOMs.
- D. The two VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in different subnets.
Answer: A
Explanation:
Explanation
FortiGate_Infrastructure_6.0_Study_Guide_v2-Online.pdf -
"Multiple VLANs can coexist in the same physical interface, provide they have different VLAN ID"
NEW QUESTION 39
Refer to the exhibit.
Which contains a network diagram and routing table output.
The Student is unable to access Webserver.
What is the cause of the problem and what is the solution for the problem?
- A. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. - B. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. - C. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. - D. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1.
Answer: A
NEW QUESTION 40
Refer to the exhibit.
Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?
- A. CLI diagnostics commands permission
- B. Read/Write permission for Log & Report
- C. Custom permission for Network
- D. Read/Write permission for Firewall
Answer: C
NEW QUESTION 41
Consider the topology:
Application on a Windows machine <--{SSL VPN} -->FGT--> Telnet to Linux server.
An administrator is investigating a problem where an application establishes a Telnet session to a Linux server over the SSL VPN through FortiGate and the idle session times out after about 90 minutes. The administrator would like to increase or disable this timeout.
The administrator has already verified that the issue is not caused by the application or Linux server. This issue does not happen when the application establishes a Telnet connection to the Linux server directly on the LAN.
What two changes can the administrator make to resolve the issue without affecting services running through FortiGate? (Choose two.)
https://www.fast2test.com/NSE4_FGT-6.4-practice-test.html 10
Valid Fast2test NSE4_FGT-6.4 Exam PDF Dumps - New NSE4_FGT-6.4 Real Exam Questions
- A. Set the session TTL on the SSLVPN policy to maximum, so the idle session timeout will not happen after
90 minutes. - B. Set the maximum session TTL value for the TELNET service object.
- C. Create a new service object for TELNET and set the maximum session TTL.
- D. Create a new firewall policy and place it above the existing SSLVPN policy for the SSL VPN traffic, and set the new TELNET service object in the policy.
Answer: A,C
NEW QUESTION 42
Which of the following SD-WAN load -balancing method use interface weight value to distribute traffic? (Choose two.)
- A. Source IP
- B. Session
- C. Spillover
- D. Volume
Answer: B,D
Explanation:
https://docs.fortinet.com/document/fortigate/6.0.0/handbook/49719/configuring-sd-wan-load-balancing
NEW QUESTION 43
An administrator has configured outgoing Interface any in a firewall policy. Which statement is true about the policy list view?
- A. Policy lookup will be disabled.
- B. By Sequence view will be disabled.
- C. Interface Pair view will be disabled.
- D. Search option will be disabled
Answer: C
NEW QUESTION 44
Refer to the FortiGuard connection debug output.
Based on the output shown in the exhibit, which two statements are correct? (Choose two.)
- A. One server was contacted to retrieve the contract information.
- B. There is at least one server that lost packets consecutively.
- C. FortiGate is using default FortiGuard communication settings.
- D. A local FortiManager is one of the servers FortiGate communicates with.
Answer: A,B
NEW QUESTION 45
......
Difficulty in Writing Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
The NSE4 test is a scenario based pass or fail exam. The examination is scored based on a set standard built by Fortinet experts who are motivated by certification industry’s most reliable practices and guidelines.
This examination can not be instantly finished because the FORTINET NSE4_FGT-6.4 practice test need to pass the examinations, these dumps require time and correct and up to date content to pass the exam with effectiveness. Several applicants are doubtful about the nature of questions posed in the exam and the complexity of exam questions and the time needed to finish the questions before writing a credential Professional certification. The most suitable way to pass the Professional Test is to question and prepare with FORTINET NSE4_FGT-6.4 dumps.
Partner Professional Exam Research Plan that assists applicants to explore their strengths and weaknesses to improve their time management skills and to get knowledge of the score they should receive. AWS Accredited Developer Professional review is the new issue to the review, that applicants without difficulties should understand. FORTINET NSE4_FGT-6.4 dumps research material from NSE4 Professional Exam is well suited to practitioners who have no money to spare on training and need to do so within a week.
Hands-on experience is the most reliable form of preparation there is. Use FORTINET NSE4_FGT-6.4 practice exam and FORTINET NSE4_FGT-6.4 practice tests to prepare for the exam. Analyzing the exam guide for information about the competencies evaluated in the certification exam is a good practice to prepare for the certification.
Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam Path
Test Preparation teaches how the exam questions can to be decoded. Our Exam Preparedness: DSCI DCPP-01 Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam FGT-6.4â Technical arrangement course is delivered in multiple configurations: study hall preparing for learning or taking an interest in a physical homeroom with an DSCI DCPP-01 Approved Learner. Free media preparing for learning whenever it is suitable for you. The course surveys test inquiries in each branch of knowledge and how the themes tried ought to be seen to such an extent that off base answers are easier to stay away from. Our course will help you in tracking down the correct answers.
Use Real NSE4_FGT-6.4 Dumps - 100% Free NSE4_FGT-6.4 Exam Dumps: https://www.prepawaytest.com/Fortinet/NSE4_FGT-6.4-practice-exam-dumps.html