Best Preparations of HPE6-A66 Exam 2021 HP Certification Unlimited 60 Questions
Focus on HPE6-A66 All-in-One Exam Guide For Quick Preparation.
NEW QUESTION 31
A network architect is designing a Wi-Fi solution for a customer using Aruba Central's VisualRF tool When creating a Campus view, how would the network architect pull in a map that displayed the campus location in a city?
- A. Import the longitude and latitude information from Google Maps
- B. Create a screen capture from any web-based map site and import the picture file
- C. Import the longitude and latitude information from any web-based map site
- D. Use VisualRF's built-in map tool and define the appropriate longitude and latitude information
Answer: C
NEW QUESTION 32
Which feature does the Aruba AP 555 support? (Select two.)
- A. 802.11ac and lower standards only
- B. three radios
- C. desk wall plate mounted
- D. high density indoor locations
- E. weather proof and temperature hardened
Answer: A,D
NEW QUESTION 33
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?
- A. VSX
- B. Distributed trunking
- C. Backplane stacking
- D. VSF
Answer: A
NEW QUESTION 34
A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 35
A company has two buildings on a campus, where each building has three floors, which two wiring closets per floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user connections. Which backplane stacking solution will provide the necessary Ethernet port capacity for all devices on Building 1 Floor 2 and is fully meshed?
- A. One 2930M 24-port POE+ switch and two 2930M 48-port switches per wiring closet
- B. One 381 OM 24-port POE+ switches and two 2930M 48-port switches per wiring closet
- C. Two 381 OM 24-port POE+ switches and three 381OM 48-port switches per wiring closet
- D. Two 2930F 24-port POE+ switches and three 2930F 48-port switches per wiring closet
Answer: A
NEW QUESTION 36
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?
- A. 5400R series
- B. 3810M series
- C. 8300 series
- D. 6300 series
Answer: B
NEW QUESTION 37
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- A. number of users per location
- B. mobility requirements and usage
- C. type of users
- D. density of users
Answer: B
NEW QUESTION 38
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 2930M
- B. 0
- C. 2930F
- D. 5406R
Answer: B
NEW QUESTION 39
A network architect has developed a design for a new Aruba Wi-Fi network that will include a virtual Mobility Master (MM) running the ArubaOS 8.4 operating system that will manage:
* Two clustered 7210 controllers with 600 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
* Wireless IPS
The architect plans on creating user roles and firewall policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?
- A. LIC-MM-VA-50 (X1), LIC-MC-VA-50 (x2). LIC-AP (X675), PEF (x675), RFP (X675)
- B. LIC-MM-VA-1000 (X1), LIC-MC-VA-50 (x1), LIC-AP (x600). PEF (X600), RFP (x600)
- C. LIC-MM-VA-1000 (X1), LIC-MC-VA-50 (x2), LIC-AP (X675). PEF (X675). RFP <x675)
- D. LIC-MM-VA-1000 (X1). LIC-MC-VA-50 (X1), LIC-AP (x675). PEF (X675), RFP (X675)
Answer: D
NEW QUESTION 40
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
- A. A standalone 7008 controller per floor
- B. Two 7205 mobility controllers in a cluster
- C. Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements? O An IAP cluster per floor
- D. Two 7030 mobility controllers in a cluster
Answer: C
NEW QUESTION 41
A company needs an upgrade of its access layer switches. The solution requires that devices connected to the access layer by authenticated and their traffic processed by the firewall features of the Aruba Mobility Controllers. Which solution should the company implement?
- A. PAPI mobility
- B. GRE tunneling
- C. Dynamic segmentation
- D. iPsec tunneling
Answer: D
NEW QUESTION 42
A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.
Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?
- A. two-tier and 10 Gbps
- B. three-tier and 10 Gbps
- C. three-tier and 40 Gbps
- D. two-tier and 40 Gbps
Answer: B
NEW QUESTION 43
A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?
- A. 3810M
- B. 0
- C. 2930F
- D. 1
Answer: C
NEW QUESTION 44
A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?
- A. 5406R switches
- B. 2930F switches
- C. 2930M switches
- D. 3810M switches
Answer: C
NEW QUESTION 45
A network architect will be using VisualRF to determine the appropriate wireless coverage for a new wireless design. Seamless, uninterrupted roaming is necessary for this design, since voice will need to be supported. Given these requirements, which information should be used in VisualRF to plan a cost effective solution that meets these requirements?
- A. Minimum -65db, 1 AP per 2,500 square feet, high density design
- B. Minimum -80db, 1 AP per 1,000 square feet, very high-density design
- C. Minimum -70db, 1 AP per 2,500 square feet, capacity design
- D. Minimum -70db. 1 AP per 5,000 square feet, high density design
Answer: A
NEW QUESTION 46
Which component uniquely defines the BSSID when implementing an employee SSID?
- A. Case-insensitive SSID name
- B. Wireless device MAC address
- C. Radio MAC address
- D. Case-sensitive SSID name
Answer: B
NEW QUESTION 47
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 3-10 feet (1-3 m)
- B. 3 feet (1 m)
- C. 30-60 feet (10-20 m)
- D. 15-30 feet (5-10 m)
Answer: B
NEW QUESTION 48
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?
- A. 5 Gbps
- B. 1 Gbps
- C. 10 Gbps
- D. 2.5 Gbps
Answer: D
NEW QUESTION 49
A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection Which SFP+ transceiver solutions would meet this requirement?
- A. QSFP28
- B. SFP
- C. SmartRate
- D. QSFP+ LC
Answer: C
NEW QUESTION 50
A network architect needs to plan a new wireless network
- A. Airwave and Central only
- B. Central only
- C. Airwave, Central, Windows, Mac OSX, and Linux
- D. Airwave, Central, and Windows only
Answer: A
NEW QUESTION 51
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 40 MHZ
- B. 20 MHz
- C. 60 MHZ
- D. 10MHZ
Answer: C
NEW QUESTION 52
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?
- A. 0
- B. 1
- C. 7240XM
- D. 2
Answer: D
NEW QUESTION 53
Refer to the exhibit.
When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?
- A. A + B
- B. A + C
- C. A + B + C
- D. A + B + C + D
Answer: D
NEW QUESTION 54
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. Two 7205 mobility controller and campus APs in a cluster
- B. lAPs in a cluster
- C. FRAPs in a cluster
- D. Two 7030 mobility controller and campus APs in a cluster
Answer: C
NEW QUESTION 55
......
Guaranteed Success with HPE6-A66 Dumps: https://www.prepawaytest.com/HP/HPE6-A66-practice-exam-dumps.html
Pass HP HPE6-A66 Exam – Experts Are Here To Help You: https://drive.google.com/open?id=1Whqe0EuIjhJjioLNG0OVXe84jJvRTzIk