In order to pass the exam and fight for a brighter future, these people who want to change themselves need to put their ingenuity and can do spirit to work. More importantly, it is necessary for these people to choose the convenient and helpful 600-212 test questions as their study tool in the next time. Because their time is not enough to prepare for the exam, and a lot of people have difficulty in preparing for the exam, so many people who want to pass the 600-212 exam and get the related certification in a short time have to pay more attention to the study materials. In addition, best practice indicates that people who have passed the 600-212 exam would not pass the exam without the help of the 600-212 reference guide. So the study materials will be very important for all people. If you also want to pass the exam and get the related certification in a short, the good study materials are the best choice for you. Now we are going to make an introduction about the 600-212 exam prep from our company for you. We sincerely hope that our study materials will help you achieve your dream.
DOWNLOAD DEMO
The convenience of the PDF version
In order to meet the different demands of the different customers, these experts from our company have designed three different versions of the 600-212 reference guide. All customers have the right to choose the most suitable version according to their need after buying our study materials. The PDF version of the 600-212 exam prep has many special functions, including download the demo for free, support the printable format and so on. We can make sure that the PDF version of the 600-212 test questions will be very convenient for all people. Of course, if you choose our study materials, you will have the chance to experience our PDF version.
Cisco 600-212 Exam Topics:
| Section | Weight | Objectives |
|---|
| Management Protocols | 11% | 1 TACACS a) Describe admin authentication and command authorization methods b) Configure Local administration levels c) Configure external authentication TACACS servers
2 Performance counters/statistics a) Describe the various performance counters b) Describe the collection and processing of performance counters c) Describe the common KPIs for various MPC nodes d) Configure counters and KPIs
3 Fault management a) Describe SNMP protocols, alarms, notification and MIBs b) Configure SNMP traps, filters and thresholds
4 syslog/events Log a) Describe system log formats and filters b) Configure syslog servers and event logs
5 Security a) Describe user access control
6 NTP a) Describe system timing b) Configure NTP servers, system clock, time zone and timestamps |
| Voice Over LTE | 20% | 1 VoLTE application messages/protocols a) Describe VoLTE specific diameter interface b) Describe XCAP, LDAP, SPML c) Describe CAMEL, CAP, INAP, SOAP, MSML
2 Voice over LTE architecture a) Describe voice evolution in mobile network b) Identify VoLTE system architecture and functions of network elements
3 Network elements in voice over LTE a) Describe CSCF b) Describe ENUM c) Describe MNP — mobile number portability/database d) Describe telephony application server e) Describe DRA/DEA f) Describe HSS g) Describe PCRF h) Describe ATCF,ATGW i) Describe MRF j) Describe understand OSS and BSS
4 QoS a) Describe QoS in EPS b) Describe end-to-end QoS in VoLTE
5 Interfaces and signaling messages a) Configure Gx interface and signaling b) Design Rx interface and signaling c) Implement Cx interface and signaling d) Describe ISC interface and signaling e) Describe Ut interface
6 End-to-end call flow a) Describe IMS client attach to EPC b) Describe P-CSCF discovery c) Describe IMS registration, re-registration and de-registration d) Describe mobile-originated VoLTE call e) Describe mobile-terminated VoLTE call f) Describe emergency VoLTE call
7 Supplementary services a) Describe IR.92 supplementary service overview b) Describe IR.94 supplementary service overview c) Describe Important services call flows
8 VoLTE Interworking a) Describe PSTN interworking b) Describe IMS/SIP interworking c) Describe e-SRVCC |
| Charging | 13% | 1 Offline charging service a) Describe offline charging architecture b) Explain the GTPP protocol header and messages c) Explain charging data record transport through GTP' d) Compare and contrast GTPP transfer scenarios e) Describe and differentiate mobility records generated by MPC nodes f) Identify and list conditions for record closure and generation g) Explain Rf offline charging scenarios h) Identify and list offline charging error cases i) Configure for offline billing j) Troubleshoot for offline billing |
| MME (4G LTE) | 16% | 1 Network functions LTE –MME a) Identify key functions of the MME and basic understanding of architecture and interfaces b) Describe MME states of MM and CM management c) Describe protocol stacks and procedures d) Describe mobility management signaling and call flows e) Describe session management signaling and call flows f) Describe location management signaling and call flows g0 Describe SGS procedures and signaling call flows h) Describe intra-MME handovers procedure i) Describe intra-RAT handovers procedure j) Describe inter-MME handover procedures
2 QOS architecture a) Describe the overall QOS functionality in LTE for single and multi pdn b) Describe the QOS mapping from UMTS to LTE
3 Configurations a) Configure S1 interface with corresponding services and system parameters b) Configure S6a interface with corresponding services and system parameters c) Configure S11 interface with corresponding services and system parameters d) Configure S13 interface with corresponding services and system parameters e) Identify and implement gateway selection mechanisms f) Identify and implement MME operator policy and feature sets g) Troubleshoot configurations
4 Network sharing a) Describe MOCN architecture b) Describe GWCN architecture
5 Security a) Describe LTE security principles for MME network node b) Explain security functions for mobility management procedures
6 Idle mode signaling reduction a) Identify IDLE mode signaling reduction in an LTE network b) Describe IDLE mode signaling establishment c) Describe IDLE mode signaling reduction deactivation
7 CSFB a) Describe CSFB architecture in LTE network b) Describe CSFB call flow and signaling
8 IPv6 support a) Configure IPV6 and dual stack EPS bearer scenarios b) Configure and implement transport plane IPV6 support for MME |
| Other Interfaces | 5% | 1 AAA/diameter related interfaces a) Describe SWx interface b) Describe S9 interface c) Describe Sp interface
2 HRPD related interfaces a) Describe S101 b) Describe S103 |
| SGW (4G LTE) | 10% | 1 Network functions LTE-SGW a) Identify key functions of the SGW and basic understanding of architecture and interfaces b) Describe SGW attach procedures and call flows c) Configure S1-U interface with corresponding services and system parameters d) Configure S5/S8 using PMIP/GTP interface with corresponding services and system parameters e) Configure S11 interface with corresponding services and system parameters
2 Feature functionality and extended application a) Describe multi-PDN support for SGW b) Describe downlink delay notification for SGW c) Describe idle mode signaling reduction support for SGW d) Configure and implement IPV6 support for SGW
3 Internetworking between LTE and other technologies a) Describe interaction with CDMA/eHRPD internetworking b) Describe interaction with GSM/UMTS internetworking c) Configure S4 interface with corresponding services and system parameters d) Configure S12 interface with corresponding services and system parameters e) Configure S103 interface with corresponding services and system parameters
4 Charging a) Configure Gx interface with corresponding services and system parameters
5 QoS a) Describe QoS bearer management and marking for SGW b) Configuring DSCP marking for SGW |
| PGW (4G LTE/EHRPD) | 15% | 1 Architecture overview a) Identify key functions of the PGW and basic understanding of architecture and interfaces
2 Implement S5/S8 and Gn/Gp interface a) Describe GTP protocol b) Describe mobility management/session management call flows c) Describe QoS in EPC d) Configure S5/S8 interface with corresponding services and system parameters e) Troubleshoot S5/S8 and Gn/Gp
3 APN a) Describe the various IP address allocation mechanisms b) Describe the concept of virtual APNs c) Configure APNs and virtual APNs with corresponding service and system parameters d) Configure IP source address validation and access control list e) Troubleshoot APN
4 Implement Gx interface a) Describe the important diameter AVPs needed for Gx b) Describe basic Gx call flows c) Configure Gx interface with corresponding services and system parameters d) Troubleshoot Gx interface e) Describe the common policy use cases f) Configure failure handling modes g) Configure usage monitoring over Gx
5 Implement Gy interface a) Describe the important diameter AVPs needed for Gy b) Describe the basic Gy call flows c) Configure Gy interface with corresponding services and system parameters d) Troubleshoot Gy interface e) Configure failure handling modes f) Describe OCS selection based on static configuration g) Describe RADIUS attributes and PCRF out-of-quota redirection handling
6 Implement AAA Interface a) Describe the basic AAA authentication and accounting call flows b) Describe the important RADIUS attributes for authentication and accounting c) Configure RADIUS interface with corresponding services and system parameters d) Troubleshoot RADIUS interface
7 Implement S6b interface a) Describe the important diameter AVPs needed for S6b b) Describe the basic S6b call flows c) Configure S6b interface with corresponding services and system parameters d) Troubleshoot S6b interface
8 Interworking with non-3GPP access networks a) Configure S2a interface with corresponding services and system parameters b) Configure S2b interface with corresponding services and system parameters c) Configure S2c interface with corresponding services and system parameters d) Configure LMA functionality on a PGW e) Configure non-3GPP IRAT handovers f) Troubleshoot S2b and S2c interfaces
9 SGi Interface a) Configure and implement various IP transport types b) Configure and implement static and dynamic routing protocols |
| Lawful Intercept | 5% | 1 Describe lawful intercept architecture and events
2 Configure lawful interception
3 Describe lawful intercept trigger element |
| LTE | 5% | 1 Describe and differentiate LTE / SAE architecture
2 Explain attach procedure and call flow |
Suitable for all people
As is known to us, people who want to take the 600-212 exam include different ages, different fields and so on. It is very important for company to design the 600-212 exam prep suitable for all people. However, our company has achieved the goal. We can promise that the 600-212 test questions from our company will be suitable all people. There are many functions about our study materials beyond your imagination. You can purchase our 600-212 reference guide according to your own tastes. We believe that the understanding of our study materials will be very easy for you. We hope that you can choose the 600-212 test questions from our company, because our products know you better.
Cisco 600-212 Exam Certification Details:
Reference: http://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/specialist-splte.html
Constant research and development
There are a lot of excellent experts and professors in our company. The high quality of the 600-212 reference guide from our company resulted from their constant practice, hard work and their strong team spirit. After a long period of research and development, our 600-212 test questions have been the leader study materials in the field. We have taken our customers’ suggestions of the 600-212 exam prep seriously, and according to these useful suggestions, we have tried our best to perfect the 600-212 reference guide from our company just in order to meet the need of these customers well. So stop hesitation and buy our study materials.